Alignment
None
|
||
HAAKE* MiniCTW Micro CompounderThermo Scientific* HAAKE MiniCTW micro-conical twin screw compounder for industrial research and development needs a sample amount of 5g or 7cm3 only. Nobody can afford to waste expensive raw materials when developing new products. In addition, it helps to shorten time-to-market and cut development costs to gain a distinct competitive advantage. Therefore, quick and early assessments of a new material are key. The micro-conical twin screw compounder Thermo Scientific HAAKE MiniCTW allows extrudating as little as five grams of material and thereby helps to accelerate the conception of the final product. 
Alignment
None
|
||
HAAKE* MiniLab II Micro CompounderThermo Scientific* HAAKE MiniLab micro compounder is ideal for the precisely controlled reactive extrusion of high viscous melts and requires only a sample amount of 5g or 7cm3. Compounding expensive or small scale materials such as nano-composites, bio-polymers or pharmaceuticals is therefore no longer a problem. Simultaneously, the rheological properties can be recorded to document structural changes. By using the optional force feeder, continuous extrusion with very small volume flows is possible. 
Alignment
None
|
||
HAAKE* MiniJet Piston Injection Molding SystemThermo Scientific* HAAKE MiniJet mini injection moulder allows you to efficiently prepare specimens from as little as 5g of material. The need to produce various sample geometries coupled with the common reality of limited material quantities can be easily done with the HAAKE MiniJet.
|
||
HAAKE PolyLab* OS systemThe modular HAAKE PolyLab OS is an innovative torque rheometer platform for process engineering in a wide range of markets. “OS” stands for the fundamental platform concept, that of Open System. The system architecture has been designed on an open industry standard, allowing a number of standardized sensors and systems to be connected to it for optical, viscosity and spectroscopy measurements. Innovative research requires measurement equipment that can confi gured differently for specifi c projects and then reconfi gured after just a few tests. Unlike HAAKE PolyLab OS, measurement devices that cover just one application scenario cannot be used in a dynamic environment. 
Alignment
None
|
||
Process 11 ExtruderThe Thermo Scientific* Process 11 is a parallel co-rotating extruder for research and development in the polymer and food industry. When developing new polymeric compounds or food formulations, performing time and material intensive experiments on production scale extruders can significantly increase costs and thus put these projects at risk. Using the Process 11 extruder, the small amount of material needed to conduct experiments enables the researcher to carry out an array of trials in a cost and labor effective manner and obtain results that are relevant to production conditions due to the full scalability of the Thermo Scientific process extruder product family. 
Image Size
Small
Alignment
None
|
||
Eurolab 16 ExtruderThermo Scientific* EuroLab 16 XL is an extendable, modular, bench top twin-screw extruder for research, development, quality control, and small-scale production. Academic customers are using EuroLab 16 XL twin-screw extruders in research and teaching laboratories, where many different, small samples can be prepared in a short time with minimum product waste. 
Alignment
None
|
||
Twin Screw Extruder 24 mmThermo Scientific* TSE 24 MC floor-mounted twin-screw extruder is ideal for compounding of test samples and small-scale manufacturing. This flexible extruder is easy to operate, and can be configured for a vast variety of applications. The TSE 24 MC's flexible barrel and screw design makes it a perfect tool to solve all kinds of processing challenges. The hinged barrel grants easy handling and cleaning. 
Alignment
None
|
||
HAAKE* PolyLab* QC Modular Torque RheometerThermo Scientific HAAKE PolyLab QC is a measuring mixer and extruder system that meets present and future quality control (QC) needs. The modular torque rheometer can be connected to an interchangeable mixer, single-screw extruder, or conical twin-screw extruder. Combining proven technology and state-of-the-art hardware and software with an easy-to-use interface that is the future of quality control, today.
|
