Niu, W., Li, Z., Ernst, F., & Lillard, R.(2020).The passivity of low-temperature carburized austenitic stainless steel AISI-316L in a simulated boiling-water-reactor environment.Journal of Nuclear Materials,537
Huddleston, W., Dynys, F., & Sehirlioglu, A.(2020).Nickel percolation and coarsening in sintered Li 4 Ti 5 O 12 anode composite.Journal of the American Ceramic Society,103(8),4178-4188.
Scannapieco, D., Lewandowski, J. J., Rogers, R. J., & Ellis, D. J.(2020).In-Situ Alloying of GRCop-42 via Additive Manufacturing: Precipitate Analysis.NASA/TM-20205003857.
Collins, L., Vasudevan, R., & Sehirlioglu, A.(2020).Visualizing Charge Transport and Nanoscale Electrochemistry by Hyperspectral Kelvin Probe Force Microscopy.ACS Applied Materials & Interfaces,12(29),33361-33369.
Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J.(2020).Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites.Australian Journal of Mechanical Engineering,18(sup1),S37-S45.
Julien, S., Kempe, M., Eafanti, J., Morse, J., Wang, Y., Fairbrother, A., Napoli, S., Hauser, A., Ji, L., O'Brien, G., Gu, X., Bruckman, L., Wan, K., Boyce, K., & French, R. H.(2020).Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part II: Accelerated tests.Solar Energy Materials and Solar Cells,211
Liu, J., Venkat, S., Carter, J. W., Bosco, N. W., Dai, J. W., Jaubert, J. W., Bruckman, L. W., & Braid, J. W.(2020).Mechanistic Insights to Degradation of PERC Minimodules with Differentiated Packaging Materials & Module Architectures.IEEE.
Liu, J., Nalin Venkat, S., Carter, J. W., Bosco, N. W., Dai, J. W., Jaubert, J. W., Bruckman, L. W., & \customboldJ. L. Braid, L. W.(2020).Mechanistic Insights to Degradation of PERC Minimodules with Differentiated Packaging Materials \& Module Architectures..
Thomas, S., Willard, M. A., Martone, A. A., Heben, M. A., Solomon, C. A., Welton, A. A., Boolchand, P. A., Ewing, R. A., Wang, C. A., Bud'ko, S. A., & Shi, D. A.(2020).Processing of Soft Magnetic Fine Powders Directly From As-Spun Partial Crystalline Fe 77 Ni 5.5 Co 5.5 Zr 7 B 4 Cu Ribbon via Ball Mill Without Devitrification.IEEE Transactions on Magnetics,56(6),1-9.
Curran, A., Wang, M., Moran, T., Colvin, D., Iqbal, N., Whitaker, C., Dai, J., Jaubert, J., Bruckman, L., Huey, B., \customboldJ. L. Braid, B., & Davis, K.(2020).Degradation of Bifacial PERC and Al-BSF Cell Minimodules with White and Clear Encapsulant Combinations in Modified Damp Heat..
Shen, X., Sinclair, N., Wainright, J., Akolkar, R., & Savinell, R. F.(2020).Evaluating and Developing a Reliable Reference Electrode for Choline Chloride Based Deep Eutectic Solvents.Journal of The Electrochemical Society,167(8).
Karimi, A., Fada, J., Parrilla, N., Pierce, B., Koyutürk, M., French, R. H., & Braid, J. H.(2020).Generalized and Mechanistic PV Module Performance Prediction From Computer Vision and Machine Learning on Electroluminescence Images.IEEE Journal of Photovoltaics,10(3),878-887.
Thomas, S., Willard, M. A., Martone, A. A., Heben, M. A., Solomon, V. A., Welton, A. A., Boolchand, P. A., Ewing, R. A., Wang, C. A., Bud'ko, S. A., Song, Y. A., & Shi, D. A.(2020).Nanocrystallites via Direct Melt Spinning of Fe 77 Ni 5.5 Co 5.5 Zr 7 B 4 Cu for Enhanced Magnetic Softness.Physica Status Solidi A,217(8).
Huddleston, W., Dynys, F., & Sehirlioglu, A.(2020).Effects of microstructure on fracture strength and conductivity of sintered NMC333.Journal of the American Ceramic Society,103(3),1527-1535.
Lyu, Y., Fairbrother, A., Gong, M., Kim, J., Gu, X., Kempe, M., Julien, S., Wan, K., Napoli, S., Hauser, A., O'Brien, G., Wang, Y., Bruckman, L., Ji, L., & Boyce, K.(2020).Impact of environmental variables on the degradation of photovoltaic components and perspectives for the reliability assessment methodology.Solar Energy,199, 425-436.
Hossain, M., Khalilnejad, A., Haddadian, R., Pickering, E., French, R. H., & Abramson, A. H.(2020).Data analytics applied to the electricity consumption of office buildings to reveal building operational characteristics.Advances in Building Energy Research.
Lan, S., & Willard, M. A.(2020).Structural, thermal, and magnetic properties of Fe79Mo B20-Cu1 magnetic amorphous and nanocrystalline alloys.Journal of Magnetism and Magnetic Materials,496
Thomas, S., Willard, M. A., Martone, A. A., Heben, M. A., Solomon, V. A., Welton, A. A., Boolchand, P. A., Ewing, R. A., Wang, C. A., Bud'ko, S. A., Song, Y. A., & Shi, D. A.(2020).Nanocrystallites via Direct Melt Spinning of Fe77Ni5.5Co5.5Zr7B4Cu for Enhanced Magnetic Softness.Physica Status Solidi A.
Longacre, A., Martin, M., Moran, T., Kolosov, O., Schneller, E., Curran, A., Wang, M., Dai, J., Bruckman, L., Jaubert, J., Davis, K., \customboldJennifer L. Braid, K., Huey, B., & French, R. H.(2020).Direct nanoscale mapping of open circuit voltages at local back surface fields for PERC solar cells.Journal of Materials Science.
Xiang, J., Lewandowski, J. J., & Willard, M. A.(2020).Tension and fatigue behavior of Al-2124A/SiC-particulate metal matrix composites.Materials Science and Engineering A,770, 138518.
Ren, Z., & Ernst, F.(2020).Stress--Corrosion Cracking of AISI 316 L Stainless Steel in Seawater Environments: Effect of Surface Machining.Metals,10, 1324-1341.
Pehlivan, E., Roudnicka, M., Dzugan, J., Koukolikova, M., Kralik, V., Seifi, M., Lewandowski, J. J., Dalibor, D. J., & Daniel, M. J.(2020).Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion.ADDITIVE MANUFACTURING,35
