Braid, J., Curran, A., Sun, J., Schneller, E., Fada, J., Liu, J., Wang, M., Longacre, A., Dai, J., Huey, B., Davis, K., Jaubert, J., & Bruckman, L.(2018).EL and I - V Correlation for Degradation of PERC vs. Al-BSF Commercial Modules in Accelerated Exposures.IEEE.
Li, Z., Paramasivam, T., Niu, W., Wang, Y., O Anderoglu, Y., Heuer, A., Maloy, S., Lillard, R., & Ernst, F.(2018).Surface Engineering of IN-718 by Low-Temperature Carburization: Properties and Thermal Stability.Surface Engineering,35, 281-293.
Lingala, S., Jayne, D., & Ernst, F.(2018).Effect of Lubricant Additives on the Tribological Behavior of Aluminum Alloy Against Steel Part I: Macrobehavior.International Journal of Materials Research.
Lewandowski, J. J., Salem, A. J., Satko, D. J., & Grylls, R. J.(2018).Effects of Post Processing on Microstructure and Mechanical Properties of SLM-Processed IN-718.The Minerals, Metals, and Materials Society (TMS).
Klinke, A., Gok, A., Ifeanyi, S., & Bruckman, L.(2018).An Automated Algorithm for Quantifying Cracks in Photovoltaic Backsheets Under Accelerated and Real-World Exposures.IEEE.
Stricker, E., Krueger, K., Savinell, R. F., & Wainright, J. S.(2018).Investigating a Bromide Supported Electrolyte for an All-Copper Flow Battery.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,165(9),A1797-A1804.
Martone, A., Lan, S., Dong, B., & Willard, M. A.(2018).Iron-Rich (Fe1-x-yNixCoy)88Zr7B4Cu1 Nanocrystalline Magnetic Materials for High Temperature Applications with Minimal Magnetostriction.AIP Advances.
Lingala, S., Jayne, D., & Ernst, F.(2018).Effect of Lubricant Additives on the Tribological Behavior of Aluminum Alloy Against Steel.International Journal of Materials Research.
Gordon, D., Huang, W., Burns, D., French, R. H., & Bruckman, L. H.(2018).Multivariate multiple regression models of poly(ethylene-terephthalate) film degradation under outdoor and multi-stressor accelerated weathering exposures.PLOS ONE,13(12).
Niu, W., Li, Z., Ernst, F., Ye, C., & Lillard, R.(2018).Stress--Corrosion Cracking of Surface-Engineered Alloys in Simulated Boiling-Water-Reactor Environment..
Hoyt, N., Agar, E., Nagelli, E., Savinell, R. F., & Wainright, J. F.(2018).Editors' Choice�Electrochemical Impedance Spectroscopy of Flowing Electrosorptive Slurry Electrodes.Journal of The Electrochemical Society,165(10),E439-E444.
Verma, A., & Carter, J. W.(2017).Physics-Informed Network Models: A Data Science Approach to Metal Design.Integrating Materials and Manufacturing Innovation,6(4),279-287.
Verma, A., French, R. H., & Carter, J. W.(2017).Physics Informed Network Models: Data Science Approach to Metals Design.Integrating Materials and Manufacturing Innovation/Springer,6(4),279–287.
Lagerlof, P.(2017).Room-Temperature Plastic Deformation of Strontium Titanate Crystals Grown from Different Chemical Compositions.Crystals 2017, 7, 351; doi:10.3390/cryst7110351.
Wang, Y., Merzlic, S., Fairbrother, A., Julien, S., Fridman, L., Loyer, C., Lefebvre, A., O'Brien, G., Gu, X., Ji, L., Boyce, K., Kempe, M., Wang, K., & Bruckman, L.(2017).Degradation Models of Photovoltaic Module Backsheets Exposed to Diverse Real World Condition..
Fairbrother, A., Avenet, J., Lyu, Y., Boyd, M., Julien, S., Wang, K., Ji, L., Boyce, K., Merzlic, S., Lefebvre, A., O'Brien, G., Wang, Y., Bruckman, L., Kempe, M., Dougherty, B., & Gu, X.(2017).Photovoltaic Array Differential Backside Exposure Conditions: Backsheet Degradation and Site Design..
Gok, A., Ngendahimana, D., Fagerholm, C., French, R. H., Sun, J. H., & Bruckman, L. H.(2017).Predictive models of poly(ethyleneterephthalate) film degradation under multifactor accelerated weathering exposures.PLoS ONE,12(5).
Parikh, H., Hilli, N., De Guire, M. R., Heuer, A. H., Liu, Z. H., & Goettler, R. H.(2017).Long-term Microstructural Changes in Solid Oxide Fuel Cell Anodes: 3D Reconstruction.J. Am. Ceram. Soc.,100(4),1653–1660.
Khalifa, A., Ferng, T., Shaw, G., Lewandowski, J. J., Liaw, P. J., & Zhang, Y. J.(2017).High Entropy Alloy Wires of Al0.3CoCrFeNi with High Tensile Strength and Ductility at Ambient and Cryogenic Temperature.Acta MATERIALIA,123, 285-294.
