Matthew Dahar, Mohsen Seifi, Bernard Bewlay and Prof. Lewandowski latest paper, titled “Effects of test orientation on fracture and fatigue crack growth behavior of third generation as-cast Ti–48Al–2Nb–2Cr,” has been published in Intermetallics Journal.

From the abstract: “The effects of changes in test orientation and load ratio on the room temperature fracture and fatigue crack growth behavior of as-cast Ti-48Al-2Nb-2Cr titanium aluminide was investigated to determine the presence of any anisotropy in mechanical properties. As-cast samples were tested in the longitudinal and transverse directions to the casting direction at room temperature in air. Load ratios ranging from R= 0.1 to R= 0.9 were used in the fatigue tests in order to determine its effects on the threshold for fatigue cracking, the Paris law slope, and fatigue crack instability toughness, Kc, in addition to deter- mining both notched and fatigue-precracked values for toughness. Optical metallography and SEM fractography were used to document the effects of orientation on the fracture path and morphology. Significant effects of changes in load ratio were obtained on the fatigue threshold and Paris law slope, while its effects on Kc and the effects of sample orientation were found to be minimal. These are rationalized by considering microstructural effects on the properties measured and are compared to similar materials processed via different techniques.”

The published paper can be accessed here:

M.S. Dahar, S.M. Seifi, B.P. Bewlay, J.J. Lewandowski, Intermetallics 57 (2015) 73.