Sobhani, S., Legg, J., Bartz, D., Kojima, J. J., Chang, C. J., Sullivan, J. J., Moder, J. J., & Ihme, M. J.(2020).Experimental investigation of lean premixed pre-vaporized liquid-fuel combustion in porous media burners at elevated pressures up to 20 bar.COMBUSTION AND FLAME,212, 123-134.
Xiang, J., Lewandowski, J. J., & Willard, M. A.(2020).Tension and fatigue behavior of Al-2124A/SiC-particulate metal matrix composites.Materials Science and Engineering A,770, 138518.
Szczecinski, N., Quinn, R. D., & Hunt, A. D.(2020).Extending the Functional Subnetwork Approach to a Generalized Linear Integrate-and-Fire Neuron Model.Frontiers in Neurorobotics,14, 92.
Miller, C., Zorman, C., & Wnek, G. E.(2020).An Improved Tactile Sensing Device for Material Characterization via Friction-Induced Vibrations.Sensors and Actuators A: Physical,303(2020),111824.
Qiu, Y., Lee, H., & Kharangate, C.(2020).Computational investigation of annular flow condensation in microgravity with two-phase inlet conditions.INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER,118
Verma, A., Hawk, J., Romanov, V., & Carter, J. W.(2020).Predictions of long-term creep life for the family of 9–12 wt\% Cr martensitic steels.Journal of Alloys and Compounds,815, 152417.
Pehlivan, E., Roudnicka, M., Dzugan, J., Koukolikova, M., Kralik, V., Seifi, M., Lewandowski, J. J., Dalibor, D. J., & Daniel, M. J.(2020).Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion.ADDITIVE MANUFACTURING,35
Fu, Y., Wang, T., Zheng, W., Lei, C., Yang, B., Chen, J., Li, Z., Lei, L., Yuan, C., & Hou, Y.(2020).Nanoconfined Tin Oxide within N-Doped Nanocarbon Supported on Electrochemically Exfoliated Graphene for Efficient Electroreduction of CO2 to Formate and C1 Products.ACS APPLIED MATERIALS & INTERFACES,12(14),16178-16185.
Kharangate, C.(2020).Advanced Hot Reservoir Variable Conductance Heat Pipes for Planetary Landers.International Conference on Environmental Systems 2020.
Cooper, C., Zhang, J., Gao, R. X., Wang, P. X., & Ragai, I. X.(2020).Anomaly detection in milling tools using acoustic signals and generative adversarial networks.Procedia Manufacturing,48, 372-378.
Chatterjee, S., Shkondin, E., Takayama, O., Fisher, A., Fraiwan, A., Gurkan, U., Lavrinenko, A., & Strangi, G.(2020).Hydrogen gas sensing using aluminum doped ZnO metasurfaces.Nanoscale Advances,2(8),3452-3459.
Pickard, S., Quinn, R. D., & Szczecinski, N. D.(2020).A dynamical model exploring sensory integration in the insect central complex substructures.Bioinspiration \& biomimetics,15(2),026003.
Zhao, B., Lombard Poirot, N., & Cavusoglu, M. C.(2020).Analysis of Contact Stability and Contact Safety of a Robotic Intravascular Cardiac Catheter under Blood Flow Disturbances.IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2020).
Melguizo-Gavilanes, J., Peswani, M., & Maxwell, B. M.(2020).Detonation-diffuse interface interactions: Failure, re-initiation and propagation limits.Proceedings of the Combustion Institute.
Ludington-Hoe, S., Shkurti, T., & Cavusoglu, M. C.(2020).Dual-Arm Needle Manipulation with the da Vinci Surgical Robot.Proceedings of the International Symposium on Medical Robotics (ISMR 2020).
Reyes, R., Kobetic, R., Nandor, M., Audu, M. L., Quinn, R. D., & Triolo, R. D.(2020).Effect of Joint Friction Compensation on a" Muscle-First" Motor-Assisted Hybrid Neuroprosthesis.Frontiers in Neurorobotics,14, 101.
