McAdams, I., Majerus, S., Zorman, C., & Damaser, M.(2018).A Conductance-Based Sensor to Estimate Bladder Volume in Felines.Proceedings of the The 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.
Boromand, A., Jamali, S., Grove, B., & Maia, J. M.(2018).A generalized frictional and hydrodynamic model of the dynamics and structure of dense colloidal suspensions.Journal of Rheology,62(4),905-918.
Pickard, S., Quinn, R. D., & Szczecinski, N. D.(2018).Simulation of the Arthropod Central Complex: Moving Towards Bioinspired Robotic Navigation Control.Springer.
Majerus, S., Chong, Y., Ariando, D., Swingle, C., Potkay, J., Bogie, K., & Zorman, C.(2018).Vascular Graft Pressure-Flow Monitoring Using 3D Printed MWCNT-PDMS Strain Sensors.Proceedings of the 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.
Takahashi, F., Katta, V., Linteris, G., & Babushok, V.(2018).Numerical study of gas-phase interactions of phosphorus-containing compounds with co-flow diffusion flames.Proceedings of the Combustion Institute.
Li, B., Singer, N., Rosenthal, A., Unal, M., Haggins, D., Yeni, Y., & Akkus, O.(2018).Chemical characterization of Maltese-cross birefringent particles in synovial fluid samples collected from symptomatic joints.Joint Bone Spine,85(4),501-503.
Gao, W., Wang, D., Seifi, M., & Lewandowski, J. J.(2018).Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy.Materials Science and Engineering A,730, 367-379.
Li, C., Liao, Y. T., T'ien, J. T., Urban, D. T., Ferkul, P. T., Olson, S. T., Ruff, G. T., & Easton, J. T.(2018).Transient flame growth and spread processes over a large solid fabric in concurrent low-speed flows in microgravity - model versus experiment.Proceedings of the Combustion Institute,37(3),4163-4171.
Chapin, K., Khalifa, A., Mbimba, T., McClellan, P., Anderson, J., Novitsky, Y., Hijaz, A., & Akkus, O.(2018).In vivo biocompatibility and time-dependent changes in mechanical properties of woven collagen meshes: A comparison to xenograft and synthetic mid-urethral sling materials: IN VIVO BIOCOMPATIBILITY AND TIME-DEPENDENT CHANGES IN MECHANICAL PROPERTIES.Journal of Biomedical Materials Research - Part B Applied Biomaterials.
Cao, P., Fan, Z., Gao, R. X., & Stangl, J. X.(2018).Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach.Journal of Manufacturing Science and Engineering,140(8).
Maxwell, B. M., Pekalski, A. M., & Radulescu, M. M.(2018).Modelling of the transition of a turbulent shock-flame complex to detonation using the linear eddy model.Combustion and Flame,192, 340-357.
Chung, K., Hashiguchi, D., Park, C., Bindas, E., Xiang, J., Willard, M. A., & Lewandowski, J. J.(2018).Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders.Metal Powder Industries Federation.
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2018).Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings.International Journal of Fatigue,111, 54-69.
Shoffstall, A., Paiz, J., Miller, D., Rial, G., Willis, M., Menendez, D., Hostler, S., & Capadona, J. R.(2018).Potential for thermal damage to the blood-brain barrier during craniotomy: implications for intracortical recording microelectrodes..Journal of neural engineering,15(3),034001.
Li, Y., Liao, Y. T., & Ferkul, P. T.(2018).Effect of flow duct height on concurrent-flow flame spread and the near-limit oscillation.2018 Spring Technical Meeting of Central States Section of the Combustion Institute.
Kwon, B., & Liao, Y. T.(2018).Experimental and numerical investigation of the ignition and burning characteristics of a group of wooden pieces.2018 Spring Technical Meeting of Central States Section of the Combustion Institute.
Soleimani nia, M., Maxwell, B. M., Oshkai, P. M., & Djilali, N. M.(2018).Experimental and numerical investigation of turbulent jets issuing through a realistic pipeline geometry: Asymmetry effects for air, helium, and hydrogen.International Journal of Hydrogen Energy,43(19),9379-9398.
Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J.(2018).Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites.Australian Journal of Mechanical Engineering.
Leopold, S., Beadling, L., Calabro, A., Dobbs, M., Gebhardt, M., Gioe, T., Manner, P., Porcher, R., Rimnac, C. M., & Wongworawat, M. M.(2018).Editorial: The Complexity of Reporting Race and Ethnicity in Orthopaedic Research.Clinical Orthopaedics and Related Research,476(5),917-920.
Arnholt, C., MacDonald, D., Klein, G., Cates, H., Rimnac, C. M., Kurtz, S. M., Kocagoz, S. M., & Chen, A. M.(2018).What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?.Journal of Arthroplasty.
Ozguner, O., Zhao, B., Jackson, R., Shkurti, T., Newman, W. S., & Cavusoglu, M. C.(2018).Three-Dimensional Surgical Needle Localization and Tracking Using Stereo Endoscopic Image Streams..
